We have (2) MP Mini Delta 3D Printers located in the Electronics Lab.
Dimensions (H x W x D) 381 x 250 x 318mm (15” x 9.85“ x 12.5”)
Note: These should already be set. Maximum width(mm): 110
Maximum depth(mm): 110
Maximum height(mm): 120
Build area shape: Circular
GCode flavor: Marlin/Sprinter
Diameter(mm): 1.75 (Don't modify this!!!)
Note: This are settings that I've found useful when working with ABS, specifically with Kodak 3D Printer Filament. ABS is comprised of 3 different plastics which are combined differently per manufacturer, results may vary.
Note: Probably the most important setting. These will create extra material on the bed for the print to adhere to.
Support Type: Touching Build Plate
Platform Adhesion: Brim/Raft (Both seem to work, brim will make the print area slightly larger)